Astm D 751 docs

Searching:
Download
Astm D 751 - Fast Download

Download Astm D 751 from our fatest mirror

CABLEGUARD™ ELASTOMERIC WRAP - The D.S. Brown...

5619 dl's @ 5298 KB/s

doc
CABLEGUARD™ ELASTOMERIC WRAP - The D.S. Brown...

The material covered by this specification shall be an elastomeric cable wrap that meets the ... (ASTM D-751) 120% minimum Tear Propagation (ASTM D-751 ...

http://www.dsbrown.com/Resources/Bridges/cableguard/CableguardSpecWeb.doc

Date added: May 15, 2012 - Views: 7

doc
www.etpinfo.com

Bonded Seam Strength ASTM D 751 Grab test Method, Procedure A. 550 lb min. 2450 N min. Abrasion Resistance ASTM D 3389, H-18 Wheel, 1000 g Load.

http://www.etpinfo.com/floating-baffle-curtain/8130_XR-5_Physical_Property_Chart.doc

Date added: May 22, 2013 - Views: 5

doc
SUGGESTED MASTER SPECIFICATION - PNA

D 751 Test Method for Coated Fabrics. 3. ... 330 psi in accord with ASTM D 751 73. d. Handling: 1) ... SUGGESTED MASTER SPECIFICATION ...

http://www.pna-inc.com/products/hydra_cure/PNA%20HydraCure%20Wet%20Curing%20Covers%20MSpec.doc

Date added: August 25, 2011 - Views: 58

doc
AC 150/5370-10C, STANDARDS FOR SPECIFYING...

Steel castings shall meet the requirements of ASTM A 27. d. ... structural steel units shall be galvanized to meet the requirements of ASTM A 123. 751-2.7 STEPS.

http://faaco.faa.gov/attachments/Division_3_Specs-d751-Manholes_etc.doc

Date added: November 10, 2015 - Views: 1

doc
072500 - Weather Barriers - DuPont USA

ASTM International. ASTM D 751; Standard Test Methods for Coated Fabrics. ASTM D 4533; Standard Test Method for Trapezoid Tearing Strength of Geotextiles.

http://www.dupont.com/content/dam/assets/products-and-services/construction-materials/assets/SPEC-97%20-%20DuPont%20RoofLiner%20Product%20Specifications.doc

Date added: February 26, 2014 - Views: 14

doc
SECTION - Engineered Textile Products, Inc.

Before executing any of the work in this section, ... 6.5 oz/yd2 220 g/m2 Thickness ASTM D 751 30.0 mils min 0.75 mm min Weight ASTM D 751 30.0 ± 2 oz/yd2 1020 ...

http://www.etpinfo.com/channelmaster/Specifications-Steel-Tanks-XR3PW.doc

Date added: July 23, 2013 - Views: 23

doc
part 2b specs - Federal Aviation Administration

Mullen Burst Strength (ASTM D 751) Min. 100 psi. Packaging and Identification Requirements - The Geotextile fabric shall be provided in rolls wrapped with protective .

https://faaco.faa.gov/attachments/0700346_specs_24.doc

Date added: January 6, 2016 - Views: 1

doc
SECTION 07533 - gsp.extra.chrysler.com

Manufacturer to guarantee the membrane thickness meets or exceeds the specified thickness when tested according to ASTM D-751.

https://gsp.extra.chrysler.com/mfg/amedd/aamebldg/2014Specs/075419%20POLYVINYL-CHLORIDE%20(PVC)%20ROOFING.doc

Date added: October 26, 2014 - Views: 1

doc
NATURAL RESOURCES CONSERVATION SERVICE

Polyvinyl chloride plastic sheeting shall meet the requirements indicated in ASTM-D-3083, table 4, table 5 (unreinforced chlorisulfonated polyethylene), ...

https://efotg.sc.egov.usda.gov/references/public/CO/CO428B_spec.doc

Date added: February 7, 2016 - Views: 1

doc
IRRIGATION WATER - efotg.sc.egov.usda.gov

Polyvinyl chloride plastic sheeting shall meet the requirements indicated in ASTM-D-3083, Table 4, Table 5 (unreinforced chlorisulfonated polyethylene), ...

https://efotg.sc.egov.usda.gov/references/public/ND/428B_Const_Spec_Ditch_Lining_Flexible_membrane.doc

Date added: November 22, 2015 - Views: 1

doc
SECTION 07525 - GAF | Roofing Shingles & Materials

American Society for Testing and Materials (ASTM) - Annual Book of ASTM Standards. ASTM D-751 ... L.E.E.D. submittal: Coordinate with Section 01115 ...

http://www.gaf.com/Warranties_Technical_Documents/Low_Slope_CSI_Specifications/Single_Ply_Adhered_Systems/T_FA_N_N_45_45FB.doc

Date added: January 22, 2014 - Views: 6

doc
Metric-SI] - gsa.gov

Follow ASTM D 2091 test procedure at 230 degrees C ... Test Method Breaking Strength ASTM D 751 ... [Metric-SI] Author: Your Name Here

http://www.gsa.gov/graphics/fas/96-572B_R2HT2-r_0Z5RDZ-i34K-pR.doc

Date added: December 15, 2011 - Views: 53

doc
Revised: July 10, 1998 - Yemm & Hart Home Page

ASTM D 751 Standard Test Method for Elongation. 4. ASTM D 751 Standard Test Method for Tear Strength. 5. ASTM D 2047 Standard Test Method for Coefficient of Friction. 6.

http://www.yemmhart.com/materials/flexisurf/pdf_flexisurf/flexisurfspecifications.docx

Date added: July 9, 2014 - Views: 13

doc
Multi-Flow drainage system by Varicore...

Pond Liner Venting and Drainage System. MODEL SPECIFICATION . 1.0 DESCRIPTION . ... lb ASTM D-751 50 Mullen Burst, psi ASTM D-3786 200 Trapezoidal Tear, ...

http://easypropondproducts.com/media/pdfs/MultiVentSpecification2010.doc

Date added: November 8, 2012 - Views: 22

doc
Division 7 - Custom Seal

Tearing Strength, ASTM D-751 245N (55lbf.), Min. Min. Properties After. Heat Aging ASTM D-751 a. Breaking Strength Per 90% . b. Tear Strength ASTM D-3045 90%.

http://www.customseal.com/PDF/CUSTOMspecTPO.doc

Date added: August 26, 2011 - Views: 47

doc
Metric-SI] - General Services Administration

Follow ASTM D 2091 test procedure at 230 degrees C ... Test Method Breaking Strength ASTM D 751 ... [Metric-SI] Author: Your Name Here

http://www.gsa.gov/graphics/fas/96-571B_R2HT2-z_0Z5RDZ-i34K-pR.doc

Date added: October 19, 2011 - Views: 59

doc
SPECIFIER NOTE: THE FOLLOWING SPECIFICATION MAY BE...

D. Sheet Metal Flashing and Trim. E ... 70 mils - Tensile strength @ break 120 lb/in ASTM D-751 Elongation 50% ASTM D-751 Tearing strength 5.0 lbs ASTM D-751 ...

http://www.derbigumenergies.us/toolbox/ContentDir/Certifications_US_file_19.doc

Date added: May 12, 2013 - Views: 9

doc
systemcomponents.net

ASTM D 751: Standard Test Methods for Coated Fabrics. ASTM D 5261: Standard Test Method for Measuring Mass per Unit Area of Geotextiles. ASTM D 1117: Standard Guide ...

http://systemcomponents.net/techlibrary/coverpro_guide_specification.doc

Date added: August 29, 2015 - Views: 1

doc
SECTION 07525 - Powder Springs, Georgia

Section Includes. Thermoplastic Polyolefin Single-Ply Roofing Membrane. ... Annual Book of ASTM Standards. ASTM D-751 – Standard Test Methods for Coated Fabrics .

http://www.cityofpowdersprings.org/DocumentCenter/Home/View/1099

Date added: March 23, 2015 - Views: 1

doc
randallmfg.com

ASTM D 751-89 sec. 10.2. 13. 18. Tongue Tear, lbs. Warp. Fill. FS 5134 / ASTM D2261. 90. 100. 95. 110. Strip Tensile, lbs. Warp. Fill. FS 5102 / ASTM D5035. 240. 185 ...

http://randallmfg.com/warehouse/wp-content/uploads/2012/10/Industrial-Curtains-Spec-Sheet.docx

Date added: March 25, 2015 - Views: 4

doc
Spec Data Sheet – AVM System 700 Rev

... ASTM D-751 (1989) PASS PASS PASS PASS Breaking Strength - ASTM D-752 ... Spec Data Sheet – AVM System 700 Rev. 10/2008 AVM Document # 30700. Title:

http://www.avmindustries.com/wp-content/uploads/specs/doc/0700-Spec-Sheet-AVM-System-700-Tile%20Waterproofing.doc

Date added: July 26, 2015 - Views: 1

doc
Division 7 - Custom Seal

Tear Strength, (lbs) ASTM D 751 200 x 45 lbs 400 x 90 lbs. Tensile Strength (psi) ASTM D-751 35 x 200 psi 50.8 x 290 psi. Breaking Strength (%) ASTM D-3045 ...

http://www.customseal.com/PDF/CUSTOMspecPVC.doc

Date added: October 16, 2011 - Views: 43

doc
www.systemcomponents.net

ASTM D 751: Standard Test Methods for Coated Fabrics. ASTM D 5261: Standard Test Method for Measuring Mass per Unit Area of Geotextiles. ASTM D 1117: Standard Guide ...

http://www.systemcomponents.net/techlibrary/coverpro_3000_guide_specification.doc

Date added: August 29, 2015 - Views: 1

doc
SECTION 07535 - New York

Tear Strength: 90 lb min, ASTM D 751 (tongue tear). 5. ... END OF SECTION. D&C JWM:dja. Updated 02/08/2008. Printed 04/16/2015 075002 - 1 Project No. Title:

https://online.ogs.ny.gov/dnc/masterspec04/docs/Division07ThermalAndMoistureProtection/075002MechanicallyAttachedHypalonRoofingSystem.doc

Date added: January 16, 2016 - Views: 1

doc
2012 Specifications - Kentucky Department of...

2012 . Kentucky Department of Education. Office of District Support Services. TABLE OF CONTENTS. PAGE ... (10) pounds of adhesion, when tested per ASTM D-751-79.

http://education.ky.gov/districts/trans/Documents/2012SpecsFinal.doc

Date added: June 28, 2015 - Views: 23

doc
CSI Division 7 Specification - Sweets

CSI Division 7 Guide Specifications ... N/A Dynamic D 5635 25 Joules 25 Joules Elongation at Reinforcement Break ASTM D-751 MD 34.29% 42.41% 15% XMD 33 ...

http://sweets.construction.com/swts_content_files/2414/389315.doc

Date added: December 1, 2013 - Views: 21

doc
Tufdek spec 07185 tuf 2012-01-01

Elongation Tear Strength - ASTM D 751: PASS. Dimensional Change - CGSB 37.54-95: PASS. Accelerated Weathering - ASTM G 154 at 5000 hours: PASS.

http://tufdek.com/wp-content/uploads/Tufdek-Full-Product-SPEC-Nov-01-2013-Hidden-Text.doc

Date added: June 22, 2014 - Views: 1

doc
2007 Specifications - education.ky.gov

ASTM D 751-79 GRAB TENSILE 150 LBS. ASTM D 1117-80 TRAPEZOID TEAR 45 LBS. ASTM D 751-79 SEAM STRENGTH 70 LBS. Seat cushions shall be constructed not to depress ...

http://education.ky.gov/districts/trans/Documents/2007%20Specifications.doc

Date added: June 30, 2015 - Views: 1

doc
SPECIFIER NOTE: THE FOLLOWING SPECIFICATION MAY BE...

The following specification outlines the requirements for a ... 70 mils - Tensile strength @ break 120 lb/in ASTM D-751 Elongation 50% ASTM D-751 Tearing ...

http://columbia-green.com/wp-content/uploads/2013/11/2K-PUR-EcoRoof-Tray.doc

Date added: April 30, 2014 - Views: 19

doc
45SIT-M/M-MM-N-20(ST4RM) - specjm.com

ASTM D 573/751, Properties After Heat Aging: Pass. Breaking Strength: 330 lbf ... 45SIT-M/M-MM-N-20(ST4RM) Subject: JM MasterSpec v. 01 Author: Brian Shamas

http://www.specjm.com/files/docs/60WST-M_M-MM-N-20(ST6RM).doc

Date added: August 7, 2013 - Views: 3

doc
neh642cont - NRCS

peel strength, lb/in*** ASTM D 751 ASTM D 413 35. 14 *All values, unless specified otherwise, are minimum average roll values as reported for the test method.

http://www.nrcs.usda.gov/Internet/FSE_DOCUMENTS/nrcs141p2_036681.doc

Date added: August 2, 2013 - Views: 22

doc
45SHT-MU/A-MM-N-20(ST4RA) - JM.com

ASTM D 573/751, Properties After Heat Aging: Pass. Breaking Strength: 330 lbf (1.5 kN) ... 45SHT-MU/A-MM-N-20(ST4RA) Subject: JM MasterSpec v. 01 Author:

http://specjm.com/files/docs/45WHT-LM_M-MM-N-15(ST4RA).doc

Date added: November 27, 2015 - Views: 1

doc
MASTERSPEC - ePro Serv

... ASTM G 23 No Effect Moisture Vapor Transmission ASTM E 96 .071 g/sq. ft. /hr. Hydrostatic Water Pressure ASTM D 751 28 psi Perm rating (US Perms) ASTM E 96 ...

http://www.eproserv.com/download.php?key=2be9ac233c7f3b0a09d53076a228b436b

Date added: June 10, 2015 - Views: 1

doc
www.arcat.com

SECTION 07 21 00. REFLECTIVE INSULATION. Display hidden notes to specifier. ... ASTM D 751, 140 psi. Tensile Strength: CAN/CGSB - 51.33-M89, 21.13 lbs/sq. in.

http://www.arcat.com/sdspecs/docx04/07_21_00cov.docx

Date added: August 9, 2014 - Views: 2

doc
www.blanket-insulation.com

ASTM D 751-95 Standard Test Methods for Coated Fabrics. Vinyl Coated Polyester Composite with Continuous Service Temperatures of 250˚F (121˚C) ...

http://www.blanket-insulation.com/PDF2014/MSWord2011/LT250A-VP-WTF.doc

Date added: December 17, 2014 - Views: 5

doc
AMERICAN CONCRETE INSTITUTE

E.D. Russell. Todd Watson CALL TO ORDER. Chairman Hanskat called the meeting to order at 8:35 AM. Roll call was taken.

https://www.concrete.org/committees/getagendaminutes.aspx?DocID=6111

Date added: January 23, 2016 - Views: 1

doc
CSI Division 7 Specification - Sweets

CSI Division 7 Guide Specifications. ... D. For a Limited Membrane Material Only Warranty, the Request for Membrane Warranty form is the only submittal required.

http://sweets.construction.com/swts_content_files/2414/389313.doc

Date added: December 12, 2013 - Views: 24

doc
Part 9 of AC 150/5370-10G Standards for Specifying...

Item D-751 Manholes, Catch Basins, Inlets and Inspection Holes557. ... ASTM A760Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains.

http://www.faa.gov/airports/engineering/construction_standards/media/AC-150-5370-10G-part-9.docx

Date added: July 13, 2015 - Views: 7

doc
INCH-POUND - CIE Hub

ASTM D-751-06: 72-79, followed by Procedure B2,41-44 except fixed 50 cm water column/10min.Aging conditions shall be 160 deg F for 7 days . After –20 F Flex Fatigue;

http://ciehub.info/spec/PRF/MIL-PRF-MCLWES.doc

Date added: August 8, 2013 - Views: 16

doc
MASTERSPEC - ePro Serv

... Vapor Transmission ASTM E 96 .01 g/sq. ft. /hr. Perm rating ASTM E 96 0.02 Hydrostatic Water Pressure ASTM D 751 26 psi Air Leakage ASTM E 2178 0.009 L ...

http://www.eproserv.com/download.php?key=2ccc5b8e4e3567b9cf93ea16cee10130b

Date added: June 21, 2015 - Views: 1

doc
SECTION 03130 - Quad-Lock Insulating Concrete...

ASTM D 751-00 – Standard Test Methods for Coated ... Fastfoot® footing forming system consists of 120’ rolls of high density polyethylene scrim coated with low ...

http://www.fab-form.com/fastfoot/fastfootFiles/FastfootCsiSpecification.doc

Date added: May 7, 2013 - Views: 35

doc
1 - parchem.com.au

Hydrostatic resistance: Passed (ASTM D-751) Elongation: 1050 % Solids content: 68 % Tensile strength: 68 psi Re-coat time: 12-36 hours ...

http://www.parchem.com.au/public/pdfs/data-sheets/EmerProof-EcoFlex-SC.doc

Date added: August 24, 2013 - Views: 2

doc
DIVISION 100 - Department of Transportation

... ASTM D 751 48.8 to 49.6 mils (d) Density, ASTM D 792 0.549 to 0.555 ounces per cubic inch (e) ... ASTM D 522, using the 1/4-inch No cracking or flaking.

http://flh.fhwa.dot.gov/resources/specs/fp-03/fp-03usc-div700.doc

Date added: August 25, 2015 - Views: 20

doc
www.prospec.com

ASTM D 4397 - Standard Specification for Polyethylene Sheeting for Construction, ... Hydrostatic Resistance ASTM D 751 Procedure B: Passes. Dimensional Stability: ...

http://www.prospec.com/uploads/cad-detail/document/09306tileadhesivesmortarsandgrouts_rev_1114.doc

Date added: December 4, 2014 - Views: 19

doc
DIVISION 100 - Department of Transportation

... ASTM D 751 1.24 to 1.26 mm (d) Density, ASTM D 792 0.941 to 0.960 g/cm3 (e) ... 6.35 6.35 6.35 ASTM D 6525 Minimum permissible shear stress(4) (pascals) ...

http://flh.fhwa.dot.gov/resources/specs/fp-03/fp-03met-div700.doc

Date added: August 21, 2015 - Views: 11

doc
www.arcat.com

ASTM D 751 - Standard Test Methods for Coated Fabrics; 2000. ASTM D 1434 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and ...

http://www.arcat.com/sdspecs/docx04/07_14_00epr.docx

Date added: June 2, 2014 - Views: 6

doc
Microsoft Word - fl717_Sept_2008.doc

ASTM D A-36, A-120, D-751, D-1494, D-1682, D-1760, D1910.; Federal Specification TT-P-641; Federal Test Method Standard No. 191, Method 5804;

http://www.nrcs.usda.gov/Internet/FSE_DOCUMENTS/stelprdb1241247.docx

Date added: January 19, 2014 - Views: 1

doc
SECTION ZZZZ - ravenefd.com

SECTION ZZZZ. REINFORCED LANDFILL COVER. ... ASTM D 5199 Mils 20 Weight. ASTM D 751 lbs/msf 74 Grab Tensile Strength. ASTM D 7004 lbs. 114 Trapezoid Tear.

http://ravenefd.com/files/9013/2519/9339/DropIn_Spec_R20BDV.doc

Date added: May 12, 2013 - Views: 3

doc
SECTION ZZZZ - ravenefd.com

ASTM D 5199 Mils 12 Weight. ASTM D 751 lbs 59 Grab Tensile Strength. ASTM D 7004 lbs 90 Elongation at Break. ASTM D 7003 % 600 Trapezoid Tear. ASTM D 4533 lbs 72

http://ravenefd.com/files/5613/2519/9337/DropIn_Spec_R12BV.doc

Date added: September 30, 2013 - Views: 1