AWWA C550. Powder Certiﬁ ed to NSF-61 6. Installed with standard ﬂ ange accessories (AWWA C110). Model 5500 Wall Indicator Post Speciﬁ cations: 1.
Date added: March 24, 2014 - Views: 1
MasterSeries® LF860 Reduced Pressure Zone Backflow Prevention Assemblies ... AWWA C550 Shutoff Valves: NRS resilient wedge gate valve AWWA C509 (Standard)
Date added: March 8, 2013 - Views: 1
coated in accordance with AWWA C550 for long service life in potable and non-potable systems. During system flowing conditions the disc swings up to the open
Date added: January 10, 2014 - Views: 1
The coating shall comply with AWWA C550 and shall be certified to NSF 61. The coating shall be non-toxic and shall not impart taste or odor to water.
Date added: October 9, 2012 - Views: 3
• AWWA C504 Sizes*: • 24in (DN600) - 72in (DN1800) Pressure Ratings: ... • VSI has NSF 61 Coatings available, as well as, several AWWA C550 certified coating
Date added: April 4, 2012 - Views: 58
EPOXY COATINGS GENERAL All materials called for in this contract, which require epoxy ... All epoxy coatings shall conform to AWWA C550-81 or latest re-
Date added: March 5, 2012 - Views: 24
Kennedy Valve AWWA Butterfly Valves comply with all applicable provisions of ... Valves are coated in accordance to AWWA C504 and C550 (as applicable). Kennedy Valves,
Date added: August 3, 2013 - Views: 3
This procedure shall be in accordance with AWWA standard C550-90 ... AWWA 100% Hardness: ASTM 3H Impact: D3363 100/100at4 ...
Date added: March 1, 2014 - Views: 1
Fusion Bonded Epoxy is a one-part, heat cured, ... 1. The coating is applied in accordance with AWWA Standard C550 “Protective Epoxy Coatings
Date added: November 8, 2011 - Views: 46
AWWA C550 Protective Interior Coatings for Valves and Hydrants. ... ASTM Standard A123-89a, "Zinc (Hot-Galvanized) Coatings on Iron and Steel Products", or
Date added: April 27, 2013 - Views: 25
ARD Metal Seated Gate Valves AWWA C500 ... Selection of coatings — internally and externally — NSF-61 approved — meets AWWA C550, protects interior and exterior
Date added: December 5, 2013 - Views: 4
AWWA C550 Standard for Protective Interior Coatings for Valves and Hydrants ... 30-B-22 Resilient Seated Gate Valve Author: mshare Subject: MWW Specification
Date added: November 29, 2011 - Views: 47
AWWA C550 and NSF 61 Certified, protects both ... Clow’s 24”– 54” gate valves have taken the best of the century-old double disc design and integrated it with ...
Date added: August 7, 2013 - Views: 4
coating in conformance to AWWA Standard C550 on internal wetted ferrous surfaces where ... AWWA Butterfly Valve Comparsion _Seat on Disc vs Seat on Body Design_.doc
Date added: May 30, 2012 - Views: 341
SECTION C-2 - VALVES C2.00 Work Included The Contractor shall furnish gate valves, butterfly valves and valve boxes complete ... shall be in accordance with AWWA C550.
Date added: August 17, 2013 - Views: 1
Awwa C504 Standard.pdf Free Download Here ... the AWWA Proof of ... several AWWA C550 ... AWWA Butterfly Valve Comparsion Seat on Disc vs Seat on Body ...
Date added: January 12, 2015 - Views: 1
AWWA C517 Standard and Full Port Eccentric Plug Valves ... Construction AWWA C517 ASME B16.34 API 598 Coatings AWWA C550 Connections ANSI B16.1 Class 125*
Date added: October 21, 2013 - Views: 3
bonded epoxy coating, in accordance with AWWA C550. If, in the opinion of the manufacturer, fusion-bonded epoxy would not be practical for the valve design, an
Date added: May 5, 2013 - Views: 20
12 AWWA C550 Protective Epoxy Interior Coatings for Valves and Hydrants 13 AWWA C600 Installation of Ductile Iron Water Main and Appurtenances
Date added: March 15, 2013 - Views: 28
Resilient Seated Butterfly Valve 3”-24” - Flanged Standards: • AWWA C504 ... • VSI has NSF 61 Coatings available, as well as, several AWWA C550 certified coating
Date added: May 30, 2012 - Views: 33
AWWA Butterfly Valve Specifications -Butterfly valves shall be of the short body rubber seated type, conforming to the latest revision of AWWA C504.
Date added: February 19, 2012 - Views: 53
and external epoxy coating conforming to AWWA C550 is a standard. ... Pratt Series 9001 AWWA Swing Check Valve Three Stage Oil Cushion with Outside Lever
Date added: January 19, 2014 - Views: 1
AWWA C550 - Protective Epoxy Interior Coatings For Valves and Hydrants . ... A. Hydrant outlet sizes and configuration shall be as shown on the Approved Plans and
Date added: November 2, 2012 - Views: 6
AWWA C550* 2” Operating Nut Ductile Iron Stem Stainless Steel (Bronze Available) Bonnet Ductile Iron Thick Wall Casting Stem Nut Aluminum Bronze Wedge
Date added: January 21, 2013 - Views: 5
FIRE HYDRANT-AWWA PRODUCT SPECIFICATIONS CUSTOMER SERVICE - Decatur, ... listed and AWWA C550 compliant. 5.21 Lock washer -- Stainless Steel, ASTM A-276 Type 302.
Date added: March 21, 2012 - Views: 6
KENNEDY AWWA C515 RESILIENT WEDGE GATE VALVES (2000) During the decade of the 1980’s the waterworks industry was introduced to the Resilient Seated Gate Valve, ad
Date added: December 2, 2014 - Views: 1
• The VSI Series AWWA C518 Dual-Disc Check Valves are designed for today’s modern water and treatment plants. ... , several AWWA C550 certified coating
Date added: February 8, 2014 - Views: 1
AWWA Standard C550. Shaft Keyed one piece ASTM A276 type 316 stainless steel through shaft design providing minimal deflection. Slotted shaft top indicates position.
Date added: May 22, 2014 - Views: 1
0o -16-4 DoubleCheckDetectorCheck BackflowPreventer forrepairpartsbreakdownsee mainassy ClaValRP4ckAssy bypassassy ClaValRP2ckassy 3"MODEL16-4 121 "1 I’
Date added: July 30, 2015 - Views: 1
American Water Works Association C504 for class 150B except as ... with American Water Works Association C550 "Protective Interior Coatings for Valves and Hydrants ...
Date added: December 6, 2013 - Views: 4
and AWWA C550. B. Keep interior of backflow prevention devices free from water, dirt, and other foreign matter The port openings shall be covered with plastic, ...
Date added: February 14, 2014 - Views: 1
Coatings shall conform to AWWA C550. Division IV – Page 191 Section 15 – Water ... Gate valves shall be Mueller A2360, American Flow Control series ...
Date added: September 11, 2012 - Views: 5
Meets or exceeds AWWA C550 O-Rings, NBR Bonnet Gasket Shaft, Bonnet Bolts, Stainless steel Washers, Keys Bushings Bronze Disc EPDM rubber with a carbon steel core
Date added: July 30, 2015 - Views: 1
M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure – 500 PSI Hydrostatic Test – AWWA ... AWWA C550 standards.
Date added: August 9, 2013 - Views: 8
AWWA Gate Valves and Check Valves Gate Valve Specifications ... • Fusion Bonded Epoxy Coating ANSI/AWWA C550 • Flanged Connection • Resilient Disc Brass Seat
Date added: June 29, 2013 - Views: 1
AWWA C550 S 6000 F ... America Water Works Association AW-WA C509, where applicable.. 2.2 Valves are tested in accordance with Testing Section 5.1 of American Water
Date added: March 13, 2014 - Views: 1
AWWA C550-90 Shutoff Valves: NRS resilient wedge gate valves AWWA C509 Trim:Bronze Elastomer Discs: EPDM Spring: Stainless steel Clamp: AWWA C606 Approvals ...
Date added: December 7, 2013 - Views: 1
M&H AWWA C515 RESILIENT WEDGE GATE VALVES (2000) ... body and bonnet. Epoxy shall be applied in accordance with AWWA C550 and be NSF 61 Certified. 11.
Date added: July 24, 2014 - Views: 1
DRY-BARREL FIRE HYDRANTS ANSI/AWWA C502-05 Revised February 2013 ... Association Standard C550-05 (ANSI/AWWA C550-05). 7 ATTACHMENT I APPROVED MANUFACTURERS
Date added: May 29, 2013 - Views: 2
Fusion bonded epoxy coating to AWWA C550 Polyurea/Polyurethane Hybrid (PUR) ... • Expect solutions, not just products • Expect quality in every step
Date added: August 3, 2014 - Views: 1
C509 3-12” Resilient Seated Gate Valves Section ... A durable fusion bonded epoxy coating both inside and out complying with ANSI / AWWA C550, providing unexcelled
Date added: November 8, 2014 - Views: 6
RUBBER-SEATED BUTTERFLY VALVES ... and shall be in accordance with AWWA C550, ... American National Standards Institute and American Water Works Association ...
Date added: May 5, 2013 - Views: 14
RELATED SPECIFICATIONS . APPENDIX B ii RELATED SPECIFICATIONS . Ductile Iron Pipe . ... Protective Epoxy Interior Coatings for Valves and Hydrants ANSI/AWWA C550 ...
Date added: March 26, 2015 - Views: 1
coated interior and exterior meeting the requirements of AWWA Standard C550, ... A. Valve extensions will be required on any gate valve where the distance from the
Date added: November 5, 2012 - Views: 13
PART III - WATER DISTRIBUTION SYSTEM SECTION 2660 CITY OF PALO ALTO: Water Distribution System ... exterior per AWWA C550.
Date added: July 27, 2012 - Views: 19
AWWA C550 and NSF61 approved, protects both inside and outside of valve. All valves are rated at 250 PSI for AWWA service. All valves are hydrostatically tested to ...
Date added: July 30, 2015 - Views: 1
STEPS NEEDED FOR WATER LINE INSTALLATION AND APPROVAL FOR SERVICE ... fusion bonded epoxy coating complying with ANSI/AWWA C550, applied hydrostatically prior
Date added: March 8, 2012 - Views: 11
AWWA C550). Valves 10 inch diameter and less shall be resilient-seated gate valves. ... Valves shall meet AWWA C504 specifications for Class 150B valves.
Date added: August 18, 2013 - Views: 10
applied in accordance with AWWA C550 and be NSF 61 Certified. 10. Each valve shall have maker’s name, pressure rating, and year in which it was manufactured
Date added: September 11, 2014 - Views: 1